Laurel Build Update

Been working on the ITB setup on the VH motor.

Started with some 2″ x 1/2″ Aluminum bar. Cut it to size and used the factory gaskets as a pattern for the holes. Laurel ITB











Mock up of the manifold. You can also see the changes made to the radiator lines.

Laurel ITB












Making the transistion from the dual 1″ holes to the 45mm throttle body outlet. I started with 2.5″ x 1/4″ wall alum. pipe, cut 30deg. pie shaped pieces off the bottom edge and  welded in fillers.



Finished welding the tubes inside and out.


Porting/polishing the transitions. Also, port matched to the head.



Leave a Reply